Roland VersaWork Dual Version 1.63
Nov. 29, 2016

Thank you for purchasing Roland DG product.  Please read the following before using Roland VersaWorks Dual.

Known Problems and Restrictions in This Release:
Problem 1:	A JPEG file which Format Option selected when it is saved is [Progressive] cannot be added to the Job List.
Workaround:	Save the file again selecting [Baseline (Standard)] or [Baseline Optimized].

Problem 2:	JPEG-compressed Tiff and ZIP-compressed Tiff files are not supported.
Workaround:	Convert the file into the Tiff format without compression or LZW Tiff].

Problem 3:	After printing with "Center on the Media" and with Crop Marks, you remove this printed media once. Even if the printer detects their Crop Marks to start cutting, printing and cutting do not match. (Only for Print&Cut machines.)
Workaround:	"Center on the Media" is to centerize the printing to the media width, that is detected by the positions of the pinch rollers. If their positions are changed, since the media width is also changed, printing and cutting do not match.After reloading the media, perform cutting without "Get Media Width", or perform both printing and cutting without "Center on the Media."

Problem 4:	When the contour line is created with activating the [Align Stroke to Inside] or [Align Stroke to Outside] in [Align Stroke] on the Illustrator, the contour line is not recognized as the contour line.
Workaround:	Set [Align Stroke] to [Align Stroke to Center].

Problem 5:	The estimated ink consumption is not calculated when a number of files are added to Job List in quick succession or all at once.
Workaround:	Add a file one by one at interval.

Problem 6:	Composed TIFF job is not processed correctly if [Mirror] in [Layout] tab is checked.
Workaround:	Use a TIFF data which reversed an image beforehand.